Solutions (9)

Tuesday, 26 September 2017 13:28


Written by


SECM - Scanning Electrochemical Microscopy

Featuring in situ Raman Functionality


SECM imaging




SECM is a tool which is used to measure processes mainly in the vicinity of a surface. This technique can be used for fuel cells research, surface reactivity of solid state materials, the elucidation of enzymatic activities and other biophysical investigations. These all call for the probe to be in the near vicinity of the analyzed surface and to be able to control its spatial orientation.

The AFM-SECM combination enables one to track the topography in real-time at a fixed working distance while electrochemical signals related to surface activity are collected at the probe. The ability to add on spectrochemical analysis enhances this technique and can set new horizons to electrochemical investigations. Monitoring the Raman signal at real time gives the ability to understand the dynamics of the chemical reactions occurring at a sub-micron resolution in the vicinity of the SECM probe. 


Innovations in SECM

Nanonics systems provide unique liquid-based capabilities in scanning electrochemical microscopy (SECM) that now for the first time can be combined with other SPM methods such as AFM-Raman for chemical imaging together with the topographic and electrochemical current imaging.  The Nanonics SECM capability incorporates Nanonics innovations in probe design, tip-sample feedback, and liquid cell design to enable new and revolutionary capabilities for the most advanced experiments.




Nanonics manufactures custom SECM probes with a continuous nanowire of platinum embedded in glass.  A side view is seen below on the left left while a top view is seen below on the right clearly showing the platinum wire and glass.  In the top-view, the white spot in the middle is the wire; the black ring around it is the glass.



SECM PRobe SECM Probe2

These custom probes provide simultaneous normal force sensing with full SECM functionality.  Tip-sample feedback is maintained with the classic optical-based deflection method where a laser is reflected off the back end of this cantilever and directed towards a detector.  Feedback can be maintained either via cantilever deflection or oscillation amplitude to keep the force, and hence tip-sample interaction, constant.

Liquid Cell/Environmental Chamber



Environmental Chamber

Nanonics provides a custom-designed liquid cell and environmental chamber to use in such measurements.






Liquid Cell - Exposed

Sample is placed in ring in the middle. Changeable wire electrodes are on the sides.



Liquid Cell - Partially Covered

SECM Cell that is partially covered to minimize evaporation.



Liquid Cell - Bottom

Contains back contact for applying voltage to the sample.



 Liquid Cell

The electrochemical cell is specially designed to protect from spillage.

Raman Integration

Nanonics systems feature full integration capabilities for real-time SECM measurements with AFM force feedback and simultaneous Raman measurements.  The Raman setup through the laser, spectrometer, and CCD camera are placed above the probe with the optically friendly scanner and probe. Fluid measurements are observed using the critically important water immersion objective.  


scanning electrochemical microscopy price 


Nanonics MV2000 SECM-Raman Integration

Especially effective with water immersion objectives from above on opaque materials.

(Pictured here with Renishaw InVia)


SECM2000 2



Nanonics MV2000 SECM-Raman Integration

(Pictured here with Bruker Senterra)










Nanonics MV4000 SECM-Raman Integration

Featuring multi-probe capabilities and unique Tuning Fork technology.  












Nanonics MV15000 SECM-Raman Integration

Entry level with optical upgrade capability. 








Case Study: Etching of Si Wafer with Au

SECM-Raman Application: Simultaneous SECM current and Raman imaging of copper during real-time etching

A silicon wafer with a thin layer of copper was used as the substrate for this electrochemical etching experiment.   The SPM probe etched a small, ~4um hole within the copper layer, exposing the silicon substrate.   Images of the substrate before (left)  and after (right)  the etching can be seen below with the etched point showing up as a dark spot in the right image.


The etching was monitored in real time with in situ Raman scattering where the Raman signature of silicon at 523 cm-1 was used to track the appearance of the silicon and thus progress of the etching process.  A sample spectrum revealing the Si peak in the Raman spectrum is shown here:


Simultaneously, the current was monitored revealing a time delay between when the current was measured and when the exposed silicon was picked up the Raman spectra.  This time delay was found to be dependent on the probe-substrate vertical distance. 











Wednesday, 29 October 2014 00:00


Written by

NSOM systems for plasmonics, photonics, and nano-optical studies with optical super-resolution


Wednesday, 29 October 2014 00:00

Raman & TERS

Written by

Transparent integration of the strength/versatility of AFM with the chemical characterization of Raman


Wednesday, 29 October 2014 00:00

Low Temperature

Written by

Low temperature Scanning Probe Microscopy with full optical integration 


Wednesday, 29 October 2014 00:00

Multiprobe AFM

Written by

Scan with 2-4 probes for a variety of nanoscale transport measurements with full optical integration


Wednesday, 29 October 2014 00:00


Written by

Scanning probe and electron/optical imaging combined in one instrument


Wednesday, 29 October 2014 00:00


Written by

BioAFM with highest force sensitivity and true integration of upright and inverted microscopes

Wednesday, 29 October 2014 00:00


Written by

Fountain pen nanowriting of liquids, gases, suspensions, and proteins with various integration options


Wednesday, 29 October 2014 00:00


Written by

Optically friendly for all SPM functions, imaging, writing, manipulation and characterization.


Do you have a question about a product?
Are you interested in a quote?


Great, please leave your name and email below,

and we will be in touch with you shortly to schedule a time.

What technique are you looking for? We're confident we have a solution for you.




Or simply contact us and one of our applied scientists will help guide you to the right product for your research or industry:

Contact Us
Get a customized quote for your research needs
Looks like Nanonics would be a great fit for your SPM research. Would you like to receive a customized quote?